Factory maintenance
Reach lighting, ducts, pipework and production equipment at changing indoor positions.
- 818-758-4076
- office@legit.com
- 3146 Koontz Lane, California
Mobile Scissor Lift galleryA repositionable scissor platform for temporary maintenance and installation work at height on firm, level surfaces.
Choose a mobile scissor lift when elevated work is directly above the base, use is temporary or occasional, and the machine can be repositioned on a suitable surface.
Reach lighting, ducts, pipework and production equipment at changing indoor positions.
Support racking, signage and building-services work on level floors.
Provide vertical access for short-duration work where the surface and wind conditions are suitable.
The task is mainly vertical, ground is firm and level, and the platform can be lowered before repositioning.
For frequent driving from the platform, use a self-propelled scissor lift. For rough or soft ground, consider a crawler model. For outreach around obstacles, use an articulating boom lift.
The catalogue values below are representative. Platform height is not the same as working height; verify final model data before quotation.
| Model | Platform height | Rated load | Platform size (m) | Motor | Approx. weight |
|---|---|---|---|---|---|
| JYPT06-0.5 Reference | 6 m | 500 kg | 2.10 × 0.93 | 1.1 kW | 880 kg |
| JYPT10-0.5 | 10 m | 500 kg | 2.10 × 1.23 | 2.2 kW | 1360 kg |
| JYPT14-0.5 | 14 m | 500 kg | 2.81 × 1.50 | 3 kW | 2400 kg |
| JYPT18-0.5 | 18 m | 500 kg | 3.07 × 1.60 | 3 kW | 3900 kg |
| JYPT06-1.0 | 6 m | 1000 kg | 2.10 × 1.23 | 3 kW | 1400 kg |
| JYPT10-1.0 | 10 m | 1000 kg | 2.10 × 1.23 | 3 kW | 1700 kg |
Confirm closed dimensions, access route, power choice, outrigger footprint and permitted occupants for the selected model.
Send project details →The chassis, outriggers, scissor stack, deck and hydraulic drive are configured around vertical access on a prepared surface.
Multiple scissor arms extend vertically while keeping the platform above the base footprint.
Guarded deck dimensions vary by model and rated load.
Power unit and cylinders raise the scissor stack through the specified platform height.
Wheels and towing connection support repositioning while the platform is fully lowered.
Levelling supports increase the working footprint and stability before lifting.
Towable aerial access depends on correct outrigger setup, level condition, wind limits and strict control of movement with the platform lowered.
Platform rails and entry gate define the protected work area.
Every specified support is deployed and levelled before raising the platform.
Accessible controls stop powered motion when required.
A controlled descent function supports recovery if normal power is unavailable.
Limit devices control the intended lifting range and final stopping positions.
Wheels are braked or chocked before the lift is raised.
Platform height, deck size and rated load must be checked alongside closed dimensions, doorway access, setup footprint and available power.
Send project requirements →The selected height and load are reviewed against access route, setup footprint, power and working environment before production.
Load, height, site and operating conditions are checked.
Dimensions, structure, controls and interfaces are documented.
Fabrication and functional checks follow the confirmed scope.
Shipping preparation and technical documents are arranged.
Platform height is the deck height above ground. Working height may include an assumed operator reach and should not replace the platform-height specification.
A towable mobile scissor lift should be lowered and prepared for movement before repositioning. It is not the same as a driveable self-propelled model.
Use a firm, level surface with sufficient bearing capacity and enough clear area for all outriggers.
Add all occupants, tools and materials that may be on the platform, then confirm the chosen height, platform size and model capacity.
The catalogue describes AC, DC battery and manual or emergency options. Final voltage and drive package depend on the model and destination.
Only after checking the specific model, wind limit, ground, weather protection and operating manual for the actual environment.