Hotels and commercial buildings
Reach lighting, atriums, signs and ceiling services with a compact clean-looking machine.
- 818-758-4076
- office@legit.com
- 3146 Koontz Lane, California
Aluminum Alloy Lift galleryA lightweight vertical mast platform for indoor maintenance, installation and narrow-access work where compact storage and easy repositioning matter.
Choose an aluminum alloy lift for directly-overhead maintenance where the machine must pass through tight access, remain lightweight and be repositioned manually.
Reach lighting, atriums, signs and ceiling services with a compact clean-looking machine.
Perform inspection and maintenance in narrow aisles or around production equipment.
Support temporary installation work where transport size and floor sensitivity matter.
The work is directly above, indoor access is narrow, floor conditions are firm and level, and platform load is relatively light.
Use a scissor lift for a larger deck or higher platform load, a crawler lift for rough ground, or an articulating boom for horizontal outreach.
Representative catalogue models are shown. Confirm current closed dimensions, outriggers, power and permitted operating environment.
| Model | Mast layout | Platform height | Rated load | Platform size (m) | Supply |
|---|---|---|---|---|---|
| GTWYQ6 Reference | Single mast | 6 m | 100 kg | 0.60 × 0.60 | 220 / 380V |
| GTWYQ8 | Single mast | 8 m | 100 kg | 0.60 × 0.60 | 220 / 380V |
| GTWYQ10 | Single mast | 10 m | 100 kg | 0.60 × 0.60 | 220 / 380V |
| GTWYQ8S | Twin mast | 8 m | 200 kg | 1.36 × 0.60 | 220 / 380V |
| GTWYQ12T | Triple mast | 12 m | 200 kg | 1.58 × 0.80 | 220 / 380V |
| GTWYQ18H | Four mast | 18 m | 200 kg | 1.60 × 0.99 | 220 / 380V |
Platform height is not working height. Verify doorway access, floor loading, outrigger footprint and supply before selecting a model.
Send project details →Aluminum mast sections, guided platform travel, stabilising outriggers and a lightweight chassis create narrow-access vertical lifting.
High-strength mast sections guide vertical platform travel while controlling machine weight.
Platform size increases with mast series and rated load.
The drive raises the platform along the mast structure with controlled motion.
Castors and handles support repositioning while the platform is fully lowered.
Supports expand the working footprint and level the machine before elevation.
Compact access equipment still requires full outrigger deployment, level setup, overhead clearance and strict control of platform load.
A guarded platform defines the operator work area.
All specified supports must be correctly placed before elevation.
Controls stop powered movement when required.
A controlled lowering method supports recovery if normal power is unavailable.
Upper and lower limits manage the intended mast travel.
Power, charger or battery components are configured for the selected supply.
The selected mast series must pass doors and corridors, deploy its outriggers at the work point and provide the required platform height and load.
Send project requirements →Height, load, closed envelope, outrigger footprint and power package are reviewed together before preparation.
Load, height, site and operating conditions are checked.
Dimensions, structure, controls and interfaces are documented.
Fabrication and functional checks follow the confirmed scope.
Shipping preparation and technical documents are arranged.
Mast count depends on required platform height, rated load, platform size and allowable closed envelope. Compare the complete model data, not height alone.
Platform height is the physical deck height. Working height may add an assumed operator reach and should not be used as the machine specification.
Some models are designed for compact access, but doorway width and height must be compared with the selected machine’s current closed dimensions.
No movement should be assumed while elevated. Lower the platform and prepare the machine according to the manual before repositioning.
The catalogue describes AC, manual and DC control options. Confirm the required package and destination supply for the selected model.
This product is primarily positioned for compact indoor access. Any outdoor use requires confirmation of the specific model, wind and environmental limits.